Firmware.jpg

 firmware update

step by step guide

Firmware Update

Afidus continues to update the firmware in immediate response to iOS/Android updates as well as implementing app improvements, performance updates, and new features.

​When you receive your camera from us at TimeLapseCameras.com we ensure each camera has been updated to the newest firmware. 

In this video we walk you through step-by-step how to update your firmware.

iOS Connection Tip: In the event you have upgraded your iOS device and you have issues connecting to the camera. Apple recommends deleting the app and reinstalling it.

Afidus recommends completing this process connected directly to a power source via the supplied USB cable or after installing brand new, name brand batteries. The camera system will alert you if there is not enough power in the batteries for the update.

July, 2021 update

ATL-200S/201S current models the current firmware is 4623

ATL-200/201 models, the firmware is 4374

1

camera is 

OFF

STEP 1:

keep the camera off 

open the app on your mobile device and tap “Firmware” in the bottom right corner

Afidus Firmware

Afidus recommends completing this process connected directly to a power source via the supplied USB cable or after installing brand new, name brand batteries. The camera system will alert you if there is not enough power in the batteries for the update.

Use fresh batteries or
plug into power source

2

download

firmware

STEP 2:

download

Select the correct version for your camera model and tap “Download Firmware”

The firmware will be downloaded to your device.

Download Firmware.jpg

opps!

GREAT NEWS!

If you get this message when you check for updating the firmware, the firmware is up-to-date and running the latest version. 

Proceed to connect the camera and go about setting your time lapse.  

Opps error Message.jpg

3

Turn

camera

on

STEP 3:

Power the camera on

And connect to Wifi

This video is at refresh on the process.

4

open app

STEP 4:

With the app open 

select settings from the flyout menu

Select FW Upgrade

Select OK to proceed

Firmware settings flyout menu.jpg
Confirm upgrade.jpg

5

update

STEP5:

update

The camera will cycle through a series of beeps then a power cycle.

When the camera LED is solid green the firmware update is complete. 

Ensure you are connected to the camera from the Wi-Fi Settings with a blue check mark and head back to app for full control of the camera.

Check your settings to ensure  the firmware is complete.

Go ahead and schedule your time lapse as you normally would.

in the palm of your hand

our handy resource available to get you started from first connection, setting your first time lapse and walk through tips through the entire process.

COVER Digital TLC Brochure_9.8.2021-07.jpg